How to Do a Garage Door Repair

If you have a car then it is essential that you have a secure garage with an efficient garage door. At the same time, it is equally important that you understand how to keep the garage door functional and perform garage door repair in case something goes wrong with the machine. Automatic overhead garage door runs on springs and it is quite easy to conduct such a garage door repair project. There are some steps that you might follow for a garage door repair project. Click on the link to get more details about the garage door repair project.

  • If the metal tracks of garage door become loose, you should tighten the screws, bolts, and nuts inside the mounting brackets. During this type of garage door repair work, if you experience that the tracks and seriously damaged, you should replace them.
  • Make sure that garage door tracks are aligned correctly. Both the tracks must be at the same height on the walls of garage. If you feel that tracks are not aligned properly, just loose the screw and then tap them gently into their original position. Tighten the screws after you have done.
  • Clean the tracks and other moving hardware using a mild household cleaner to remove the dirt accumulated dirt and hardened grease. Wash all the moving components and rollers thoroughly and then wipe them using a cotton cloth.
  • Lubricate all the parts of garage door including the rollers and tracks with the help of silicone spray and graphite. You may use any mild house hold oil for this objective. Rusted or broken garage door parts should be replaced.
  • Check the springs to make sure that they have right amount of tension. If you experience difficulties in opening or closing the garage door, you adjust the tension by shifting the spring hook to the next notch or hole. If the springs are controlled by pulleys, you should adjust the tension by pulling the cables throughout the plate above the garage door and then re-knot the end of springs.
  • Automatic garage doors are equipped with safety sensors and reversible motor that runs along a rail above the garage door. The carriage of the motor is connected to a drawbar that runs to control the travel path of garage door. Recent models of garage doors are installed with radio receiving system and rolling code technology. Thus, when you try to attempt the garage door repair project on your own, make sure that you have right idea about the mechanism of garage door.